|
|
Post by ourway77 on Aug 10, 2016 6:09:36 GMT -5
Is the factory Savage ML-II a large shank or small shank barrel
|
|
|
|
Post by edge on Aug 10, 2016 8:41:35 GMT -5
Mine was a small shank, but there may be a mixture. The original 10ML was a large shank IIRC.
edge.
|
|
|
|
Post by ourway77 on Aug 10, 2016 10:50:42 GMT -5
Thanks One FS on the FS section I have a Savage Model 12 Haven't had a reply from the poster Lou
|
|
|
|
Post by jims on Aug 10, 2016 15:51:55 GMT -5
Initially I thought they were small shanks but late in production and near the end of production and with a different action spacing as I recall they went to the large shank. I do not know the serial numbers, rossman may know.
|
|
|
|
Post by bestill on Aug 10, 2016 16:29:15 GMT -5
Small shank barrel will measure 1.055 in front of nut and nut width .875
Large shank will measure 1.120 and barrel nut width.625
|
|
|
|
Post by rossman40 on Aug 11, 2016 11:07:23 GMT -5
Usually the nuts will be different on a large shank compared to a small shank,  There use to be a step on the early large shank so that the large shank barrel contour match the small shank and would still fit in the stock designed for the small shank.  That kinda disappeared so it is always best to measure to confirm. |
|
|
|
Post by ourway77 on Aug 27, 2016 3:50:22 GMT -5
Thanks so very much that clears that up my model 12 is a small shank the barrel nut is 7/8" I am still waiting a reply from the person that has the barrel.
|
|
