|
Post by bestill on Aug 14, 2015 7:31:18 GMT -5
Can anybody give me there findings on bore and groove specs for shilen 45? I know they could vary but ideal would help. Especially if could measure a sized bullet
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 14, 2015 7:42:09 GMT -5
I will size and measure later if I get a chance but typically .4497-.4499 I believe.
|
|
|
Post by Dave W on Aug 14, 2015 13:06:59 GMT -5
Mine would take the older BEs which were .4505 from package to bore with no sizing. I called them when I ordered mine and the guy I talked to checked the lands with a pin gauge. If memory serves, it was between .449-.4495 before lapping. You could call them and see if they would check for you. They were very helpful with my questions.
|
|
|
Post by bestill on Aug 14, 2015 15:38:54 GMT -5
Thanks good info.
|
|