|
Post by scalian on May 30, 2015 19:20:28 GMT -5
I have a few stocks that i have drilled out and added pillars to. I just have a washer over the pillars currently and am looking to find some escutcheons to clean up the look but am having trouble finding any for sale. Do you guys have a source for them?
|
|
|
Post by 7mmfreak on May 30, 2015 19:41:11 GMT -5
You can get them custom turned or buy the Remington OEM parts. I also, just have my pillars counter-sunk to accept my action screws. If you need an OEM part, I have spares or you need to look for a part called a, "guard screw bushing, front" not escutcheon. Part number is: F15161
|
|
|
Post by bestill on May 30, 2015 20:32:17 GMT -5
Hankins rifle makes a very nice stainless Eschuseons
|
|
|
Post by rossman40 on Jun 3, 2015 11:24:46 GMT -5
If you have the dimensions you want I could cut you some out of aluminum.
Myself, I do not use them, I prefer a clean bottom so I use the "mushroom head" pillars.
|
|
|
Post by fishhawk on Jun 3, 2015 15:24:55 GMT -5
Brownells sells the Remington one for the front screw.
|
|
|
Post by Richard on Jun 12, 2015 8:18:40 GMT -5
A cheap counter bore on your present pillar should work fine if the diameter is wide enough. Most doing gun work incorporate the recess right into the pillar......could be done on a drill press, lathe or even with a hand drill. Richard
|
|
|
Post by hankinsrfls on Jun 12, 2015 12:12:37 GMT -5
Eschuseons are the way to go in my opinion. With the shoulder on them it makes it impossible for the pillar to come loose...
Jeff Hankins.
|
|