|
|
Post by nitro1947 on Jan 20, 2009 14:53:11 GMT -5
tomorrow going to the range and i want a load for 5744 and 250 xtps sabotless in my 45 pacnor..ty
|
|
|
|
Post by sw on Jan 20, 2009 21:03:24 GMT -5
I believe the powder (5744) is totally unsuited for this application. It is way too fast and the velocity would be very low. Powders of the speed of the 4198's H-322, etc work better. Try 55-57g H-4198. If you are going to have only 1 powder for the 45 sabotless, H/IMR-4198 would be a good choice.
|
|
|
|
Post by nitro1947 on Jan 20, 2009 22:01:57 GMT -5
thanks SW been waiting for u to answer me ...always here to learn more about 250 grain bullets and 45 pacnor..on my way to basement to load some 4198...i'm just looking for an excuse to go to the range ...put a resonator on my barrel to try also..always probing
|
|
|
|
Post by rbinar on Jan 20, 2009 22:18:56 GMT -5
tomorrow going to the range and i want a load for 5744 and 250 xtps sabotless in my 45 pacnor..ty If you want to shoot sabot-less the load depends on the bullet weight. Don't shoot 57 grains of H4198 with a 300 grain bullet! But with a 250 grain bullet it would be fine. Try these guidlines H4198. 250 grain bullet 55 to 57 grains 275 grain bullet 53 to 55 grains 300 grain bullet 51 to 53 grains |
|
