|
|
Post by hankinsrfls on Oct 4, 2014 20:42:19 GMT -5
I am in need of 100 pieces of 308 brass.. Once shot all of the same head stamp,,, if anyone has some that they do not need or want please let me know how much you want for them... Thanks. Jeff..
|
|
|
|
Post by 7mmfreak on Oct 4, 2014 22:30:59 GMT -5
I have 100 prepped, once-fired for a match in a couple of weeks. It's Winchester and I probably have another 300 of Federal and Hornady that is once fired but no prep. What are we needing brass for? I use mine but might be able to get more if I end up sending some your way.
|
|
|
|
Post by hankinsrfls on Oct 5, 2014 9:50:34 GMT -5
I built myself a short and light weight 308 for deer hunting this year and I always like to load 100 rounds for all my rifles. Once loaded I keep them in a MTM box and if need to make a shot I have it handy.. This is my only deer rifle other than my 15 pounders and for hunting the woods I just wanted something compact. The un prepped brass will work fine for me and I don't care what head stamp as long as its the same... Thanks. Jeff.. Here's a picture of the 308. Total weight is 8lbs 5 ozs. It was build using a Lilja #4 barrel, 1-11 twist. Manners stock and a vortex 3-12x42 scope. The action is a model sever Remington. Shot it today and got under 1 inch groups with some corelok ammo.. Good hand loads should do better...  Jeff.. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 5, 2014 11:05:05 GMT -5
Jeff I have 100 new winchesters I can send you. Let me know via PM and I'll get them out to you.
|
|
|
|
Post by hankinsrfls on Oct 5, 2014 15:34:41 GMT -5
Thanks.. To the PM's on the brass.. I should have brass by Wednesday.. Jeff ..
|
|
|
|
Post by hankinsrfls on Oct 9, 2014 8:10:55 GMT -5
Thanks to Myers and Hammer. I got my brass yesterday and loaded it last night... Thanks to both of you... Jeff...
|
|
|
|
Post by 10ga on Nov 2, 2014 20:51:44 GMT -5
My heart went all aflutter when I saw the rattle can camo job. Looks good. Would match my old M65 jacket real good. 10
|
|
|
|
Post by hankinsrfls on Nov 3, 2014 21:52:17 GMT -5
My heart went all aflutter when I saw the rattle can camo job. Looks good. Would match my old 65 real good. 10 That's not a rattle can paint job... Its Cerakote with a matte clear coat and antiskid additive, applied with an air brush..... Jeff. |
|
