|
Post by 12ptdroptine on Mar 18, 2012 12:19:37 GMT -5
Ok I have had most of the stuff to start reloading for several years.( Rock chucker supreme) I believe kit. I will be loading .223 .45acp . Possibly 30-06, and .243 and .308 if I pick one up. I dont have a bench yet for reloading. I have a very nice metal work bench that I intended on using. However another metal bench I use for measuring out my mzl loader load's shocks me every time I touch it...kinda un-nerving with powder around. So I plan to build a reloader/ gun cleaning bench. Thinking about mounting 2 presses so I dont have to flip and flop die's as frequently. So Please show me some pics of your setup and advise me on mine. Thanks Drop
|
|
|
Post by Al on Mar 18, 2012 13:36:49 GMT -5
snagged this NRMAR bench pic off the web, but have a pair of these built, one for CF's, one for shotgun reloading. I have the plans for it someplace, but heck if I can find them at the moment.
|
|
|
Post by muznut on Mar 18, 2012 15:18:50 GMT -5
Nice bench.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 18, 2012 17:10:49 GMT -5
Many hours spent in this room ... I reload so that I can shoot more. Actually I enjoy reloading and the results as much as shooting. Zen
|
|
|
Post by Al on Mar 18, 2012 17:32:59 GMT -5
Zen, who scrimshawed the skulls?
also like the "knife holder" !
|
|
|
Post by muznut on Mar 18, 2012 18:11:40 GMT -5
12pt ground your bench and it wont shock you.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 18, 2012 22:22:45 GMT -5
Zen, who scrimshawed the skulls? also like the "knife holder" ! Al...... No scrimshaw on the skulls....just boiled and rubbed to give them a weathered look.. I like the euro look... Zen
|
|
|
Post by ricksalisbury01 on Mar 21, 2012 9:54:42 GMT -5
|
|
|
Post by smokepole50 on Mar 22, 2012 21:53:10 GMT -5
Be very careful reloading for your pistol. It is very easy to double load 5.0 grains of pistol powder in a 45ACP case. I always do one cartridge at a time once I reach the adding powder stage. Add powder, look in the case, seat bullet and set aside to taper crimp later.
Smokepole50
|
|