|
Post by slugger on Mar 16, 2012 17:46:46 GMT -5
New primed Fiocchi 3 " hull, 2 3/4"Multi metal wad,1 1/2 oz lead "F" ( 20 caliber) 42 pellets, 34.5 gr "blue dot" powder, a .060 clear over shot card and a roll crimp, I also run a bead of glue around the top.
New primed Fiocchi 3 1/2" hull, 3" MM wad 1 7/8 oz Lead "f" 54 pellets,38.5 gr blue dot powder,.060 clear over shot card ,roll crimp and glue around the top.
The new roll press looks and works like a sweet deal..
3 1/2"next to a 2 3/4" :thumbsup:
|
|
|
Post by Al on Mar 17, 2012 4:13:03 GMT -5
From BPI's Ugly Coyote Loads. We used both loads below this year with 54 pellets of T buck and did pretty good. You must have bought them out of F buck as that was my first choice Some I roll crimped, some I fold crimped, in new clear hulls. Tell you, those Steel loads in a Nova will will let you know the gun went off!! Good idea on the bead of glue, what you using? L0AD# 100113-1655 “Lead Lightning” HULL: FIOCCHI 12 gauge 2.75” “UGLY COYOTE” PRIMER: FIO616 PROPELLANT: Alliant STEEL 37.0 Grains WAD: VP65 (Mica dust the wad) SHOT: 1-1/2 ounce (656 grains) large lead shot BUFFER: none FOLD CRIMP: 6-point Result: PSI 11500 FPS 1410 L0AD# 100113-1653 “Lead Lightning” HULL: FIOCCHI 12 gauge 2.75” “UGLY COYOTE” PRIMER: FIO616 PROPELLANT: Alliant BLUEDOT 37.0 Grains WAD: VP65 (Mica dust the wad) SHOT: 1-1/2 ounce (656 grains) Large lead shot BUFFER: none FOLD CRIMP: 6-point Result: PSI 11500 FPS 1370
|
|
|
Post by slugger on Mar 17, 2012 9:18:42 GMT -5
"Good idea on the bead of glue, what you using?"
I just use model glue.
|
|
|
Post by mike3132 on Mar 17, 2012 14:39:59 GMT -5
Could you use a hot glue gun to seal them? Would dipping them in hot wax be better?
I wonder how much increase of pressure gluing causes? With 12.5k limit slight modifications might do more than one thinks. Mike
|
|