|
Post by TGinPA on Nov 13, 2011 9:38:24 GMT -5
Tar12: FWIW, some loads I traced using N110 as a single. For all, primers were Fed209A. The earlier curves are different from the later ones because I had to rebuild my PT setup and the new module was different from the old one. However, all tracings were calibrated against what I use as a “standard” load. So the peak pressures can be compared. Somewhere in here, I hope you find a safe accurate load for your daughter. Though all seemed safe in my barrel, they might not be under other conditions. TG N110 42gr, Hornady 225ftx, Lubed wool/fiber wads, resized (.452-.448) N110 42gr. Hornady 250SST, Lubed Wool/fiber wads, resized(..451-.448) N110 40gr., Hornady 250SST, Lubed wool/fiber wads, resized (.451-.448) N110 50gr., Hornady 200xtp, Harvester smooth blue sabot N110 35gr., Hornady 200xtp, Harvester smooth blue sabot N110 42gr., SR4759m 43gr., Hornady 300xtp Lubed Wool/fiber wads, resized(.452-.448)
|
|
|
Post by tar12 on Nov 13, 2011 15:37:50 GMT -5
What timing! ;D I have no plans in taking the N110 over 34-35 grns. max.....
|
|