|
Post by kenny549 on Dec 13, 2010 19:09:38 GMT -5
Im thinking about putting a peep sight on my 50cal. hawken and I need some advise on what ones are the most used and best place to purchase one. I have never used one before so any advice on this would be of help, and yes I wear glasses if that makes any difference in size of aperature, or where to mount it on the gun.
|
|
|
Post by swampmen on Dec 13, 2010 20:37:24 GMT -5
I have a Willams peep with a hole if to small you can drill out there a screw you use your other one Hows does $35 ship to you sound It is for a hawkens TC
|
|
|
Post by petev on Dec 14, 2010 20:22:20 GMT -5
I really like Williams peep sights too. For huning I find it best just to unscrew the aperture and hunt with the remaining large hole.
|
|
|
Post by smokepole50 on Dec 14, 2010 22:15:51 GMT -5
I would consider a tang mounted flip up peep sight. I once lost a very nice buck because I could not see thru the peep sight. The buck was only 40 yards away. Marbles sight are always a good tang sight but check out these long range sights............. www.buffaloarms.com/browse.cfm/2,217.html Smokepole50
|
|
|
Post by 10ga on Dec 14, 2010 23:04:27 GMT -5
I have Lyman peep sights on 2 of my smokey guns, 50 and 58 cals. They are nice. You can change the aperture or use none. They are easily ajustable for windage and elevation. They mount on the tang but do not fold down. They are not traditional but are good! Just visit the Lyman website to see what they look like. Got mine from Brownells. 10 ga
|
|
|
Post by DHinMN on Dec 15, 2010 9:29:48 GMT -5
Thompson Center does make a peep sight for their Hawken. It fastens to the tang. I have one on mine and works quite well. Any peep sight you choose will be and improvement over open sights.
|
|
|
Post by 221fireball on Feb 2, 2012 7:35:00 GMT -5
i don't think tc made that peep,i believe its just a williams sold under the tc name.
|
|
|
Post by brad502 on Feb 14, 2012 23:34:54 GMT -5
i use the t/c hunter peep sight, tang mounted. Love them
|
|
|
Post by sharpshooter on Dec 1, 2012 20:59:05 GMT -5
Big advantage for the Lyman is the precision adjustments. I have both a TC and a Lyman. TC used to make a tang mounted aperture sight with front globe. The front globe had several different inserts.
|
|
|
Post by 7mmfreak on Dec 2, 2012 11:04:49 GMT -5
Big advantage for the Lyman is the precision adjustments. I have both a TC and a Lyman. TC used to make a tang mounted aperture sight with front globe. The front globe had several different inserts. Here is a TC vernier rear on a Renegade. Provides good accuracy and elevation adjustments but once windage is set (aperture slides in dovetail and locks versus click adjustment of a Seoule sight) you have to hold for wind. This picture is rotates 90 degrees because I had to turn phone sideways to get all of target in frame. These sights are no longer in production. I found this one on Ebay.
|
|
|
Post by 10ga on Jan 11, 2013 15:50:58 GMT -5
7mm, the butplate on that Renegade looks hard to this old guy!
|
|
|
Post by edwardamason on Jan 11, 2013 16:50:08 GMT -5
7mm, the butplate on that Renegade looks hard to this old guy! Not speaking for 7mm only for myself. They are a bit hard but on a ML styled like that it would be sacrilegious to put a recoil pad on there
|
|
|
Post by 7mmfreak on Jan 12, 2013 6:52:39 GMT -5
It is pretty hard, 10GA. With a bullet of 460*488gr and a charge of 75gr or more the recoil becomes uncomfortable. It will be getting a red Pachmayr or Galazan soon.
|
|