My brush '06
Jun 29, 2010 19:46:56 GMT -5
Post by jtwodogs on Jun 29, 2010 19:46:56 GMT -5
Been pidling with this rifle for a couple of years.
Had my gunsmith cut recrown the barrel to 19 inches re-install the factory sites. Pillar bed, and give me a crisp 2lb trigger, it is a pre-jlock model 700 long action 30/06. When I do my part it will put 3 150 gr. Hornady poly tips 3/4 of an inch @100 yds. Got full length stock off willsnipe, cut and re-contoured, and did a duracoat finish on the whole thing. Topped off with qiuck detach rings and a Leupold 2x8. Took two nice Ky. bucks last year with it. One a 17 point non-typical.
![]()
i438.photobucket.com/albums/qq103/jtwodogs/HPIM0122.jpg[/img]
Had my gunsmith cut recrown the barrel to 19 inches re-install the factory sites. Pillar bed, and give me a crisp 2lb trigger, it is a pre-jlock model 700 long action 30/06. When I do my part it will put 3 150 gr. Hornady poly tips 3/4 of an inch @100 yds. Got full length stock off willsnipe, cut and re-contoured, and did a duracoat finish on the whole thing. Topped off with qiuck detach rings and a Leupold 2x8. Took two nice Ky. bucks last year with it. One a 17 point non-typical.
LOL!!
