ryan
Button Buck
Posts: 4
|
Post by ryan on Dec 18, 2019 12:09:32 GMT -5
Hi guys new to the forum
I am building a new smokeless M.L. via a short action savage with a 50 cal bore
I was looking though the smokeless data on this site and have a question:
I am shooting a .358 bullet in a sabot that is then in turn in another sabot (duplex) before you say that doesn't work or what not, you just know this part is not new to me been shooting them for years soooo.
Question is there is no smokeless data for a .357 or .358 in the "Load Data" pages It says it would be updated in the future. I do not want a duplex powder load Just 1 simple powder load that moves it along in the lower 2000'S FPS. Shooting the Barnes TTSXBT with a 200 grn bullet.
|
|
|
Post by jims on Dec 18, 2019 12:53:06 GMT -5
It may have been done but certainly do not recall it or that any test data on the same but I have been wrong before.
|
|
|
Post by GMB54-120 on Dec 18, 2019 14:19:35 GMT -5
Smokeless is a whole other game when it comes to sabots handling the load. Peak and rise to peak are faster than powders like BH209. Sabots blow easier.
Maybe ask this in the smokeless section instead. Lots of guys dont even bother looking here in the SMOKER section and posting data here wouldnt be wise anyway.
|
|
ryan
Button Buck
Posts: 4
|
Post by ryan on Dec 18, 2019 15:01:23 GMT -5
Thanks Guys
|
|
|
Post by ET on Dec 19, 2019 0:56:15 GMT -5
I have locked this thread for now as it doesn't belong here and has been restarted by originator in the Smokeless Forum. Instead of deleting this thread I have left it as a reminder of posting in proper Forum.
Ed
|
|