|
Post by hornet22savage on Oct 16, 2019 9:41:30 GMT -5
I built an AR-10 .243 WIN on a TN Arms Poly lower with an Aero M5 upper Columbia River barrel. Gun is shooting high at 100 yds. Scope is adjusted all the way down. I started out with a Vortex Cantilever mount current part # CANT-1 but switched to Weaver XX High rings. Moving the scope closer to the barrel made it better but the un is still 4 inches high at 100. Did I do something wrong in the assembly or did I get a bad piece of equipment? Scope is a Redfield Revenge 6-18x44 and came off my Savage 110.
|
|
|
Post by billc on Nov 2, 2019 17:11:03 GMT -5
Last time I had a rifle that I couldn't get on paper after using all of the scope adjustment, I got Burris Signature rings and Burris insert kit with various MOA thicknesses.
|
|
|
Post by ported45 on Feb 20, 2020 14:33:29 GMT -5
Wouldn't really think you would have to with an Aero, but did you check to see if the receiver face was square? May need some lapping.
|
|