|
Post by ET on Aug 21, 2019 22:49:42 GMT -5
For normal single powder shooting I prefer transparent vials in a 12Ga shell box. When a vial is emptied, I return it to its original location but upside down. This allows me to easily monitor usage and remaining vials. Now that I will be including duplex loads, I’ve combined vials to keep the load together instead of having separate vials. The plastic vials will not allow themselves glued together so I fused them together with heat from a soldering iron. These vials were done a while back in preparation for using duplex-loads but life changing circumstances put everything on hold for a while. To complete this task, I wanted to use a carrier again. So, I recently bought a 3-1/2” 12Ga shell box and they just fit. Well one didn’t and requires a trim of abought 1/16”. So now I feel ready to enter the duplex arena being more vigil to monitor my progress through duplex load usage. I’m sure others have their own method of handling duplex loads and feel free to share on this thread. Someone who might be new to this would enjoy knowing options. Ed
|
|
|
Post by jims on Aug 22, 2019 7:47:01 GMT -5
That is a clever idea.
|
|
|
Post by peteo on Aug 23, 2019 19:49:29 GMT -5
Very nice. Should work well.
|
|