|
Post by quest4170 on Mar 25, 2019 8:43:26 GMT -5
Savage says no bullet to bore , but has anyone tried this
|
|
|
Post by jims on Mar 25, 2019 8:52:32 GMT -5
If you are talking about going sabotless a number have done this with .45 replacement barrels. In a stock .50 Savage barrel a few have done this with the right bullets. Maybe those doing that can give you what they used.
|
|
|
Post by quest4170 on Mar 25, 2019 17:41:39 GMT -5
Im reffering to a .500 bullet with a vegi wad
|
|
|
Post by billyboy on Mar 25, 2019 18:58:09 GMT -5
Yes, you can use bore size bullets in your 10ML-II. Might try the following: Thor (made by Barnes) no wad required. You will need their sizing pack to know what fits your bore. Fury .503” knurled bullets with wad. Hornady FPB no wad required & probably need to use BH209 or mild smokeless load. I read that these are being discontinued.
|
|
|
Post by quest4170 on Mar 26, 2019 18:33:58 GMT -5
I was hopeing to use about 60-64 grs of R7 but sounds like maybe I shouldnt
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 27, 2019 8:37:16 GMT -5
I was hopeing to use about 60-64 grs of R7 but sounds like maybe I shouldnt I no longer have a 50 barrel but if I did I wouldn't hesitate to use said powder load sabotless.
|
|
|
Post by 10ga on Mar 28, 2019 22:34:46 GMT -5
MLII 50 and upgraded 700ML 50 = I use Fury star point at 315 grains and they are sized to my preference, .501, and thor "250" at same size, .501. shoot VV N110 and Rel 7. My results and opinion, others will differ. 10ga
|
|