|
|
Post by buckstuds on Jan 21, 2019 17:30:42 GMT -5
I have 4198, n110, 322, 4759. I would like to stay under 40,000 psi. Gun will have 209 ignition. Looking for 2400-2600 fps. This will be in a 45. Let me see some of your most accurate loads. Thanx in advance.
|
|
|
|
Post by hatchetjack1 on Jan 21, 2019 18:30:23 GMT -5
60 gr of 4198 with dry wool wad between the sized and knurled 250 gr TEZ and powder. 1'' group at 100 yds. Same load and wool wad shooting 290 gr TEZ gave about 1.5'' group at 100yds. Smokeless 45 cal MGM Encore from ASG with Federal 209A primers. Never got a chance to chrono it but speed should be up to par.
|
|
scat
Spike
Posts: 37
|
Post by scat on Jan 22, 2019 10:17:10 GMT -5
They need a hard kick to fatten them up. They shot well for me with 10gr imr4759 under 60gr of h4198 with a dry wool wad. 25" bbl 2777 fps mv.
|
|
|
|
Post by rambler on Jan 22, 2019 11:04:03 GMT -5
I have 4198, n110, 322, 4759. I would like to stay under 40,000 psi. Gun will have 209 ignition. Looking for 2400-2600 fps. This will be in a 45. Let me see some of your most accurate loads. Thanx in advance. What are the details of the gun you'll be using? |
|
|
|
Post by Dunthat on Jan 22, 2019 14:09:14 GMT -5
They need a hard kick to fatten them up. That's been my experience also.... 11/59 N110 / H322 or 10/58 4759 / 4198... wool wad somewhere around 2700fps...Both accurate enough with plenty of punch.. |
|
|
|
Post by buckstuds on Jan 22, 2019 21:08:42 GMT -5
I will look those up to make sure they are under my limit.
|
|
|
|
Post by eml9 on Jan 22, 2019 21:34:44 GMT -5
Straight charge of 60grains 4198 has worked well for me out of several Sml ... never had issue getting the 250 Tez to obturate
|
|
