|
Post by joelmoney on Aug 10, 2018 0:05:25 GMT -5
Well this summer I started shooting a Hankins CVA converted SML. After loading my DI modules a few times I was not real impressed with the aluminum shellholder. After a month of not being happy with it I wrote Jeff an E-mail. He informed me he was not impressed either. Jeff told me to send in the bad module holders and he would send me ones made of stainless steel. Well he did and they work beautifully in RCBS priming tools. It's nice to know some businesses still have good customer service. Thanks Hankins Custom Rifles for showing customers still matter to some.
|
|
|
Post by edge on Aug 10, 2018 9:20:42 GMT -5
Unless you are advertising, which would not be allowed, I think you signed onto the wrong board.
I'll move this to the Back Porch for you.
|
|
|
Post by Dave W on Aug 10, 2018 11:23:15 GMT -5
Whats the problem with the aluminum ones?
|
|
|
Post by rambler on Aug 10, 2018 11:54:22 GMT -5
Nothing wrong with mine, but I had someone else make it.
|
|
|
Post by edge on Aug 10, 2018 12:13:22 GMT -5
LOL
|
|
|
Post by joelmoney on Aug 10, 2018 14:12:01 GMT -5
Whats the problem with the aluminum ones? They dented and would not hold modules straight. The primer would have to be seated then turn module a half turn and re-seat or the primer would stick out on one side.
|
|