|
Post by killahog on Feb 10, 2017 17:23:18 GMT -5
I could use a little help in finding a stock for a 243 build. I have right hand a Remington 700 SA DBL and I have a 24" barrell that starts at 1.250 and tapers to 900 12" ahead of the action. I am looking for a HS precision or similar stock that I can skim bed without the need to install pillars , if anyone has one thier not using or can send a link to one I would appreciate it.
|
|
|
Post by 7mmfreak on Feb 10, 2017 20:51:31 GMT -5
I personally would buy B&C over H-S because they are cheaper and I think fit is usually better. Any BDL inlet will work and you'll just need to do some work on barrel channel.
|
|
|
Post by killahog on Feb 11, 2017 1:22:48 GMT -5
I will look into them ,
|
|
|
Post by killahog on Feb 11, 2017 8:07:08 GMT -5
I personally would buy B&C over H-S because they are cheaper and I think fit is usually better. Any BDL inlet will work and you'll just need to do some work on barrel channel. Thanks for the tip Freak, after doing some reading I ordered the M40 stock.
|
|