.40 Subcal Sunday @ 200yds
Apr 24, 2016 20:43:35 GMT -5
Post by Dave W on Apr 24, 2016 20:43:35 GMT -5
Temps in the low 70's with little to any wind, could only feel the evening thermals dropping into the valley on my cheek and back of my neck. Made a die adjustment from last time so some of these bullets had been through the die 4-8 times and I wanted to get rid of these. There was some inconsistencies in seating resistance as a result which was expected from the mic readings I got.
All groups were shot at 200yds.
Started out with 64gr H322 and the 200 SST. Timed-2866-2868-2871 Avg-2868fps ES-5fps The fouler on that group was from a later group when I switched powders and bullets.
Next 64.5gr H322 Timed 2871-2871-2855 Avg-2866fps ES-15fps
Third was 65gr H322 and the last shot was really loose fitting. Not sure if it was relevant or not?
Timed 2870-2868 no reading on the last shot in the group.
For the last group, I switched to the 310gr CMC bullet with 110gr 7828 SSC to see if the new die setting made any difference. No timer readings, too dark by then. Fired one fouler up high on the top target since I was switching powder and then these 3 shots.
This bullet really shoots well in this gun.
SST's didn't shoot that great with the new setting but loading resistance was off too since some of these had been resized so many times, least these are out of the box now. Was real happy with the 310 CMC's as usual!!
Full targets so I don't get accused of cherry picking.
All groups were shot at 200yds.
Started out with 64gr H322 and the 200 SST. Timed-2866-2868-2871 Avg-2868fps ES-5fps The fouler on that group was from a later group when I switched powders and bullets.
Next 64.5gr H322 Timed 2871-2871-2855 Avg-2866fps ES-15fps
Third was 65gr H322 and the last shot was really loose fitting. Not sure if it was relevant or not?
Timed 2870-2868 no reading on the last shot in the group.
For the last group, I switched to the 310gr CMC bullet with 110gr 7828 SSC to see if the new die setting made any difference. No timer readings, too dark by then. Fired one fouler up high on the top target since I was switching powder and then these 3 shots.
This bullet really shoots well in this gun.
SST's didn't shoot that great with the new setting but loading resistance was off too since some of these had been resized so many times, least these are out of the box now. Was real happy with the 310 CMC's as usual!!
Full targets so I don't get accused of cherry picking.
going to take my baseball and go post over at,- woops, can't do that either. 
