|
Post by speedrackin on Nov 28, 2014 19:08:22 GMT -5
What kind of loads would an encore with a custom barrel 1.0 contour be able to handle . Ive heard chatter that the frame design is alot stronger than H&R and CVA apex ...... and the fact that u can buy them in some good butt kickin calibers ...... what do the guys on this board think . Im thinkin it isn't so much the heavy barrel but frame design?
|
|
|
Post by rangeball on Nov 28, 2014 20:42:24 GMT -5
In an sml the barrel and plug hold all the psi. SMI will even put one on an h&r shotgun frame.
Get a proper barrel profile and the sky's the limit.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2014 21:22:33 GMT -5
+1,plug/barrel combination is at least 95% of the equation....imho.....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 28, 2014 21:58:17 GMT -5
Biggest issue is that a 1.000" barrel won't offer much protection against a large double load. It would shoot 70grs of 4198 and a 275 all day, every day but double load it and you have a great chance of chunky soup. One of the reasons the break opens generally are used with lighter loadings.
|
|