|
Post by bowbender6 on Nov 25, 2014 20:40:29 GMT -5
Only shot about 20 out of my new 45 pacnor using crush rib and 200sst. Getting about 1.5 to 1 inch groups with 10/50 of 4759/4198. Would like to try some different bullets. What sabots are you guys using. I have crush rib, the green ones that come with sst and a bunch of brown knights. What are the pros and cons of each.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 25, 2014 20:52:13 GMT -5
The light blue harvester is the most common one used for a .40 220gn and 195gn bullet in a .458 bore...They should tighten your groups up to under an inch in a pacnored custom...What kind of loading pressure are you getting with the sabots you have been using....? If loose then try knurling some of your sst's up some to increase the diameter and filling the bore up more....
|
|
|
Post by bowbender6 on Nov 25, 2014 22:13:49 GMT -5
About 20 pounds pressure (medium) with the 200 sst medium knurl with the blue crush rib. I think a tighter fit might help. I thought about ordering some smooth blue harvester Sabots if they are tighter.
|
|