|
Post by cuda on Oct 1, 2014 16:26:43 GMT -5
How hard are set screws? They could be drilled just like original vent screw were and would be a little deeper to get Alan wrench into them to get them out. My son asked me what I thought and I said the only way you would know it to try it in one BP. So he wanted me to ask on here first. When we were talking about them we want to try a 1/4" set screw that way if we wanted we could go with a bushing later. Any pros or cons about this idea?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 1, 2014 16:29:59 GMT -5
It will probably only be as hard as a button head or the vent liner type screw. To my knowledge most Allen heads are considered grade 8
|
|
|
Post by ET on Oct 1, 2014 16:49:32 GMT -5
Cuda
Vent liner screws can be bought with a grade 12 rating for hardness. This is what I use.
Ed
|
|