|
Post by brute on Sept 20, 2014 18:58:23 GMT -5
Anyone have a bolt for a 700 ML or know a source for one ? Afraid I'm S.O.L. .
|
|
|
Post by 7mmfreak on Sept 20, 2014 19:07:37 GMT -5
If you just need a bolt body you can get them from Brownell ' s and midwayusa. Springs can be had from Wolff. Shrouds are easily had as well. If you need an open bolt firing pin that may be another story to there are likely a few about the board.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2014 19:23:32 GMT -5
Is yours lost or damaged? I think they are pretty pricey from midway or brownells but definitely available.
|
|
|
Post by lakeplainshunter on Sept 21, 2014 5:36:33 GMT -5
|
|
|
Post by jims on Sept 21, 2014 7:01:02 GMT -5
Sometimes I see whole 700 mls sell for two hundred dollars. You could have spare parts or sell off the balance and then have less in it.
|
|
|
Post by rossman40 on Sept 21, 2014 7:55:06 GMT -5
From the 2014 Remington parts list all that is left is blued, $103 just for the bolt body from them. If you want the assembly the bolt shroud is a common part and available aftermarket, the main spring is the same as a model 7, the firing pin is NA but I have a few decent OEM ones around as do maybe others (but they are often pretty corroded out of used guns), if you switch to a Hunter kit.... The only hard part is the cocking piece, Luke is the only man in town for those, he had a batch made.
|
|
|
Post by brute on Sept 21, 2014 9:45:40 GMT -5
Thanks for the suggestions, I'll check 'em out .
|
|