|
Post by 7mmfreak on Aug 26, 2014 5:54:25 GMT -5
|
|
|
Post by speedrackin on Aug 26, 2014 6:25:07 GMT -5
add a Hankins ignition and some hinge pin work with some for end work those groups with shrink for sure inexpensive accurate M/L
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2014 7:17:05 GMT -5
yep saw that this morning myself, only problem for a smokeless conversion you need a 45-70 barrel to put on it. still not a bad buy though..
|
|
|
Post by hankinsrfls on Aug 26, 2014 10:42:48 GMT -5
Bill. I just finished doing two conversions for Bob Parker on the Thompson Center Encore. One was a custom shop 45/70 and the other was just their standard 45 caliber muzzleloader barrel. I will have to admit that the standard 45 caliber barrel shoots better than the custom shop 45/70 barrel does. I installed my plug and use LRMP's in both of them. Both give good accuracy but the 45 ML barrel is a little better shooting the bullets smooth formed. Jeff.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2014 10:59:27 GMT -5
Bill. I just finished doing two conversions for Bob Parker on the Thompson Center Encore. One was a custom shop 45/70 and the other was just their standard 45 caliber muzzleloader barrel. I will have to admit that the standard 45 caliber barrel shoots better than the custom shop 45/70 barrel does. I installed my plug and use LRMP's in both of them. Both give good accuracy but the 45 ML barrel is a little better shooting the bullets smooth formed. Jeff. Jeff do you have pictures of the encore you did?
|
|
|
Post by hankinsrfls on Aug 26, 2014 11:02:10 GMT -5
Pm me your e-maill address and I will send you some.. Then you can post them here if you want. Jeff.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2014 11:07:43 GMT -5
sounds good.
|
|
|
Post by bestill on Aug 26, 2014 16:03:28 GMT -5
Im curious is 45 ml and 45/70 barrel same profile. (Contour)
|
|
|
Post by dannoboone on Aug 26, 2014 17:56:06 GMT -5
....and a barrel. Can't tell for sure if the .45-70 barrel is for the regular Encore or the Pro-Hunter, though.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2014 22:02:22 GMT -5
Here is a conversion on the h & r platform hankins did. Looks good
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 26, 2014 22:27:38 GMT -5
Very nice and slick set up! Impressive stuff Jeff
|
|
|
Post by speedrackin on Aug 27, 2014 8:27:29 GMT -5
Jeff , i cant say enough , thank you for taking the time too look into and do what i wanted ..... I'm way beyond the 209 primer sys have been for yrs . Cant wait to get my hands on it. Its the perfect start to get into the Smokeless Game. Ive already got the buck picked out on the farm ..... Thanks again for taking the time. John
|
|