|
Post by mz1227 on Jul 21, 2014 19:29:21 GMT -5
Hello, Ladies and Gentlemen
I have searched high and low, and I was wondering if you guys here on this forum could possibly help me out. I really need a ramrod support and screw ( this piece attaches to the barrel with one screw and holds/supports the ramrod while it is in the stock) Mine is broken and I have trying multiple time to fix it I really need another one. Please if you all could help me out I would be most grateful. Please let me know if you have any of these or something close to it new or used I dont care. Thanks If you happen to have one please message me and let me know how you would like to get paid. Thanks again for your help
|
|
|
Post by usmcssgt on Jul 21, 2014 19:39:48 GMT -5
Is it the black band around the barrel, or that flat spring steel piece under the stock? 700ML schematic (numrich)Part 18 or part 21?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 21, 2014 20:44:33 GMT -5
PM hillbill, Luke, Richard, Rossman etc.. (the in house builders). That will prolly be ur best bet. Hopefully someone will chime in and help ya out.
|
|
|
Post by jbm77 on Jul 21, 2014 21:52:24 GMT -5
I have 2 rem 700 take off barrels with ramrods sitting in safe. pm me if interested
|
|
|
Post by jbm77 on Jul 21, 2014 21:54:15 GMT -5
If interested pm me, I have two rem 700 take off barrels and ramrods sitting in my safe
|
|
|
Post by usmcssgt on Jul 31, 2014 20:43:32 GMT -5
Sent out today!
|
|