|
Post by encore50a on Jul 9, 2014 14:56:59 GMT -5
I shoot .45 Win Mag cases, loaded with a LMRP in my Ultimate muzzleloader. After they are seated by the bolt on the nipple 3 or 4 times, it pushes down the inside enough to start some blowback into the case. I understand that its about the life in the muzzleloader of the cases. However I'd still like to clean and polish them, both inside and out.
That said, what's my best option?
|
|
|
Post by squeeze on Jul 9, 2014 15:35:22 GMT -5
a cheap harbor freight rock tumbler and some stainless pins as media media tumbler
|
|
|
Post by dannoboone on Jul 9, 2014 17:16:50 GMT -5
a cheap harbor freight rock tumbler and some stainless pins as media media tumbler+1, and add some Lemi-shine to the water
|
|
|
Post by 7mmfreak on Jul 10, 2014 14:57:38 GMT -5
I use a Thumlers Tumbler Model B High Speed and stainless pin media or a Harbor Freight Sonic Cleaner depending on how much brass needs to be cleaned. Either way I use this method.
|
|
|
Post by encore50a on Jul 10, 2014 15:36:47 GMT -5
Thanks guys..........
|
|