|
|
Post by flatlandmadman on Apr 7, 2014 15:07:43 GMT -5
Greetings from NW Ohio. I just picked up a Savage 10 ML in order to get into muzzleloading for the next deer season. I look forward to learning a lot from your forums.
While this is my first muzzleloader, I'm experienced in pistol, shotgun, and rifle reloading. I'll definitely be looking into the loads section!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 16:18:44 GMT -5
Welcome aboard. If your in the flatlands you have to be close to Jims and myself.
Btw I've been told a 300gr and 4759 is a great place to start.
|
|
|
|
Post by flatlandmadman on Apr 7, 2014 16:39:16 GMT -5
I'll have to pick some up tomorrow after work. How many grains do you suggest?
Right now I have some H4198 with 250gr XTPs and Harvester red cruncher sabots. The former owner used 52grs with that combo.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 18:02:19 GMT -5
I have never owned a savage 50 so I'll have to double check the charge. I've just been told not to waste time under 300gr bullets and that 4759 is a performer.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2014 21:20:02 GMT -5
Talked to my hunting buddy with the 10ml2, he is using 42.5gr sr4759 under a 300 Speer deep curl. So somewhere in the 42-43gr range might give you good results. If you find you like 4759 stock up, word is it will not be available after this year.
|
|
