|
Post by winmag on Nov 10, 2013 9:56:55 GMT -5
hello from ky I just acquired a 700ml action but the guy couldn't find the bolt and retainer screw, is it useless.
|
|
|
Post by rossman40 on Nov 10, 2013 16:30:43 GMT -5
Welcome to the board!
Trying to get a replacement bolt assembly from Remington, I'm afraid your out of luck. You need the bolt body and the firing pin assembly. Sometimes you can find a used one someone is selling because the rest of the rifle turned into a rustsicle. $100 is a decent price for a complete used bolt. You can get blue bolt bodies with handle from Brownells, $112.99. If your dead set on a SS one I might be able to help you out.
If you break it down on what you need for the firing pin assembly,
Bolt shroud, common Remy 700 part, $25 Firing pin spring, same as a model 7, $6 Firing pin cross pin, common Remy 700 part, $5 Cocking piece, 700ML part, Luke at Arrowhead had a batch made and is the only place I know of that has them, $30 Firing pin, again a 700ML part, if you contact Luke, Hillbill or Fishhawk they may have a decent one that was a take-off on a Hunter conversion. Of course if you do a Hunter bolt nose conversion you get a new firing pin and firing pin cross pin.
For the bolt retention screw Brownells has them in blue for $6 but on backorder. I made a batch up in SS and I'll sell you 2 for $12 shipped.
|
|
|
new member
Nov 11, 2013 16:56:48 GMT -5
via mobile
Post by winmag on Nov 11, 2013 16:56:48 GMT -5
Thanks for your reply, I'm going to build a one but it might be after Christmas, I'm trying to round up the small stuff right now I have a scope, stock, and an action. I have a Remington LTR stock will that bolt right up without any work with a Sendero contour barrel.
|
|