|
Post by slugger on Jan 21, 2012 15:19:02 GMT -5
3" 1/2" 12 gauge 2 oz 42-#4 Lead-Buck Fio 3 1/2' hull 616 primer,Multi metal 3 1/2 wad, no buffer ,clear over shot card, Roll crimp ,38 gr steel powder. Trim 1/8 inch of the case off before rolling.
3" 12 gauge ,1 5/8 oz ,41 Nickel plate "F"Lead shot,Fio 3 " hull, 616 primer, Multi metal 3" wad, No buffer, clear over shot card roll crimp 37.5 gr blue dot powder. Trim 1/8 inch of the case off before rolling.
I use theses with My turkey choke .690 out of my 870. Very affective out to 65/70 yards. At 60 yards I get around 75 % shot in a 30" target Most of that is in side the 15" mark. Coyotes-R-Us[/size]
|
|
|
Post by Al on Jan 21, 2012 17:49:19 GMT -5
Just patterned this BPI load lastnite.
New 2 3/4" Fiocchi primed hull, 35gr Steel, BPI VP65 wad, 1 1/2oz or 56 pellets "T" buck, 6pt crimp.
Benelli M2 Tactical with a 18 1/2" barrel and a Blackbore ER choke. 3 shots put 27, 23, 28 pellets on a 8" paper plate tacked to a tree at 45yds.
Shows some promise, maybe some PR buffer will tighten things up a bit more.
|
|
|
Post by jeremylong on Jan 21, 2012 20:44:53 GMT -5
I've never reloaded for shotgun coyote rounds. You guys seem to take it a step further than the standard #4 buck we use around here. Nice.
|
|