225FTX 4759 50Cal PT
Jul 3, 2011 5:16:18 GMT -5
Post by ET on Jul 3, 2011 5:16:18 GMT -5
Well I have got started into the world of pressure tracing loads.
Anyway I won’t get into long details because it was a matter of crazy unexpected events occurring.
I thought my first presentation should be with my best result with using the 225FTX. This load also impressed me with my first group at 100yds.
Boy does this organizing for presentation take some time. Also there is an error on the target picture that should read 49gr of 4759 instead of 50gr.
Reviewing this data I decided to try a group using 49gr of 4759 as the OBT indicated this may produce a good group. It did and I will try 50grns next go.
The shot out of the group was my error from flinching and rushing to get in the shot before a thunderstorm hit. The other 3-shots grouped .875”.
Note these loads were shot with the temp around 80F using Harvester Sabots.
As I get into this a little more it will be better organized.
Ed
Anyway I won’t get into long details because it was a matter of crazy unexpected events occurring.
I thought my first presentation should be with my best result with using the 225FTX. This load also impressed me with my first group at 100yds.
Boy does this organizing for presentation take some time. Also there is an error on the target picture that should read 49gr of 4759 instead of 50gr.
Reviewing this data I decided to try a group using 49gr of 4759 as the OBT indicated this may produce a good group. It did and I will try 50grns next go.
The shot out of the group was my error from flinching and rushing to get in the shot before a thunderstorm hit. The other 3-shots grouped .875”.
Note these loads were shot with the temp around 80F using Harvester Sabots.
As I get into this a little more it will be better organized.
Ed
great start ed a very nice trace and great group. Look forward to your future testings.